9010/9020 Controller

The 9010/9020 SIL controller comes with advanced design and innovative features. Monitoring up to 20 channels, it’s now also SIL 2 suitable. The 9010 controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes with an independent AC/DC power supply for increased system reliability. Both units feature full internal diagnostics, which minimize false alarms and unexpected down time. The controller powers up the remote gas detectors, while its large four-digit LCD and LED provide crucial information such as gas concentration, alarm status and more.
The 9010/9020 LCD controller monitors up to 20 channels and comes with an independent power supply. The LCD version has approvals for FM (North America) and CCCF (China) whereas the 9010/9020 SIL controller is ATEX and SIL2 certified.

Note: This product can be configured.

Configuration allows you to tailor the product to meet your specific needs.

Where to Buy Request Information

configure this product

AVAILABLE PART NUMBERS

9010/9020 Controller

Part Number

Description

10093662

9010 LCD, CU in wall mount housing

10093663

MODEL 9020 WALL MOUNT REV3

ZZ0700004857

9010/9020, NEMA4X Metal 5card, 4 9020 3wir, 110V

SIL 2 suitable
Improved menu navigation (additional ESC key)
One hardware configuration for all detectors
Re-configuration of controller module is performed by a software menu
Every module has its own power supply
Universal power supply with improved power distribution to connected sensors
Backwards compatibility (works together with former 9010/9020 version)
9010/9020 controllers monitor up to 20 channels
Large LCD and LED inform about gas concentration, alarm status, time-out function and more
RS 485 for Modbus RTU and Ethernet for Modbus TCP
19” rack and wall-mount version

Markets: General Industry, Oil & Gas, Utilities

Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.

Standards:
EN 61010:2010 (Low voltage directive)
EN 50270:2015 (EMC)
EN 60079-29-1:2007 (ATEX Perfomance)
EN 50104:2010 (Oxygen Perfomance)
EN 50271:2010 (Software)
EN 61508:2010 (SIL 2; Functional safety)

Approvals:
ATEX performance II (1) G (2) G
Certificate BVS 16 ATEX G001
SIL 2 suitable
Certificate TÜV